Judge DRACO on your own card
Running an ID, payment or access card programme? Send us your design or blank cards before the show, subject to lead time, and we personalise them at the stand. You see the result on your own product.
TRUSTECH 2026 · Paris, 1–3 December
Find us at stand 5.3 E091
DRACO personalises an ID card with your name in front of you, in under 30 seconds. Choose polycarbonate, hybrid or metal. The card is yours to keep.
- Dates
- 1 to 3 December 2026
- Venue
- Paris Expo Porte de Versailles
1 Place de la Porte de Versailles, 75015 Paris - Our stand
- Pavilion 5.3, stand E091
- Opening hours
- 1 and 2 December: 9:00 to 18:00
3 December: 9:00 to 16:00
Your visit
From reservation to finished card
Send your name and material
Fill in the form below with the name for your card, your email and a material: polycarbonate, hybrid or metal.
We hold a 15-minute slot
Choose 1, 2 or 3 December and we email you to confirm your slot. The photo is optional: upload one with the form, or we take it at the stand with a tablet.
DRACO personalises it in front of you
Laser engraving and chip encoding in one desktop unit. Under 30 seconds from blank to finished card.
Tap it with your phone
The chip opens the card’s record: how it was made and checked, in about five seconds.
Card record
Example of what your card shows
- Made by
- DRACO, LIZAR stand
- Personalised
- 2 Dec 2026, 11:42
- Quality check
- Passed, GUEKO.ai inspection
- Fleet
- Managed remotely with IGUAN MDM
Reserve
Reserve your card
Send the form and we email you to confirm your slot at the stand.
- The photo is optional. Upload a portrait photo of at least 400 × 500 pixels, or we take it at the stand with a tablet.
- Your name and photo are used only to make the card, and are deleted after the show.
- Prefer to write? Email sales@lizarsystems.com.
Meet DRACO
It does what the big machines do, and goes where they can’t.
- Time per card
- < 30 seconds (just-in-time)
- Throughput
- 40–100 cards / hour
- Laser
- 20 W custom MOPA fibre, 1,200 dpi
- Chip encoding
- Contact and contactless personalisation
- Substrates
- PC (MAKROFOL®, LEXAN), PETG, HYBRID, metal, wood
- Weight
- 30 kg, desktop mounting
- Quality check
- GUEKO.ai inspects every credential.
- Fleet
- Native fleet management via IGUAN MDM.
Before you visit
Your questions
Where is the LIZAR Systems stand at TRUSTECH 2026?
Pavilion 5.3, stand E091, at Paris Expo Porte de Versailles in Paris. TRUSTECH runs from 1 to 3 December 2026: 9:00 to 18:00 on 1 and 2 December, and 9:00 to 16:00 on 3 December.
How long does DRACO take to personalise a card?
Under 30 seconds per card (just-in-time). DRACO engraves the card with a 20 W custom MOPA fibre laser at 1,200 dpi and encodes contact and contactless chips in the same unit, at 40 to 100 cards per hour.
Which card materials can I choose?
At the stand you can choose polycarbonate, hybrid (a polycarbonate surface over a PVC core) or metal. DRACO also personalises PETG and wood.
Do I need to send a photo?
No. You can upload one with the form, a portrait photo of at least 400 × 500 pixels, or we take it at the stand with a tablet. Your name and photo are used only to make the card, and are deleted after the show.
Can I see DRACO personalise my own card design?
Yes, subject to lead time. Send us your design or blank cards before the show and we personalise them at the stand, so you can judge DRACO on your own product.
Something else? Email sales@lizarsystems.com.